Top 10 Lampholder Kit for Ceramic Base UK – Lamp Bases

As an Amazon Associate I earn from qualifying purchases.

1. PEBA

#ad

PEBA, for DIY Pendant E27 Socket, E27 Lamp Holder, Black Bakelite Edison Screw Lampholders Fitting, Vintage Bulb Holders, External Thread Retro Style, 5-Pack

#ad
PEBA #ad - It can be used for DIY chandelier, kitchen, dining room and office etc. High qualitypeba e27 lamp holder has passed ce certification and is made of bakelite. It has the characteristics of fire resistance, heat resistance up to 180°C and corrosion resistance.

If you have any questions, please contact PEBA directly, because your 100% satisfaction is our top priority. Applicationlight bulb holder is suitable for all e27 lamps: LED incandescent lamps, decorating living room, halogen lamps and energy-saving lamps up to 60 W. It can be reused and disassembled freely, which is more environmentally friendly and convenient. Quality servicepeba promises to provide you with 24/7 online service, 90 days refund policy and 24 months support.

Classic designblack old-fashioned solid bakelite socket, with antique and industrial appearance, can be perfectly matched with light bulbs of different shapes and colors. Environmental protectionlight adapter has no buckle, which makes it easy to adjust the power cord. Add a lampshade with a diameter of 40mm and adjust the wire length to produce different decorative effects. Voltage: 0-250v; Current: 4a. Turn the lamp holder in the opposite direction to open it.
BrandPEBA #ad
ManufacturerPEBA #ad
Part Number624
Model624

2. ElekTek

#ad

ElekTek ES E27 Lamp Bulb Holder with Shade Ring 10mm Entry Brass Ideal for Vintage Filament Bulbs

#ad
ElekTek #ad - This product is suitable for lighting circuits only. Solid brass, shade ring, made in the uk. Before installing, switch off electricity at mains.

Has an internal safety locking screw in the base to prevent the loosening of the lamp holder after it has been installed. 1/2 inch entry threaded skirt e27 Earthed Lamp Holder with shade ring. Ideal for vintage look lamps and bulbs. Locking body m10 10mm threaded entry edison Screw ES E27 cap brass earthed lamp holder, with threaded skirt, internal locking screw and ceramic interior with brass plunger contacts. This solid brass edison screw ES E27 lamp holder is intended primarily for attachment to a male 10mm threaded connector. T2 temperature rating 220°C.
BrandElekTek #ad
ManufacturerBuy It Better Ltd. #ad
Part NumberSIN_948546

3. ElekTek

#ad

ElekTek ES E27 Batten Lamp Bulb Holder with Plain Skirt Ideal for Vintage Filament Bulbs Brilliant White

#ad
ElekTek #ad - Earth terminal - threaded skirt with 48mm diameter shade ring - Ceramic interior - Brass plunger contacts. Maximum body diameter 38mm - height fully assembled 54mm - 67mm Diameter base plate with fixing holes on 2" centres BESA - 17mm Diameter aperture to underside. E27 es 27mm edison Screw cap batten lamp holder. This solid brass es e27 27mm edison screw cap lamp holder is intended primarily for attachment to conduit and flat surfaces. Before installing, switch off electricity at mains. Premium product made in the UK.
BrandElekTek #ad

4. ElekTek

#ad

ElekTek Premium Lamp Kit Antique Brass Safety Switch B22 Lamp Holder with Twisted Brown Flex and 3A UK Plug

#ad
ElekTek #ad - All electrical work should be undertaken by persons competent in the wiring and installation of these items. To ensure electrical regulations are met two types of strain relief are provided. Extra components are provided to ensure maximum compatibility with existing parts. If in any doubt, please consult a qualified electrician. Perfect for creating a new lighting project or refurbishing an old table lamp. The included comprehensive lamp kit Accessory Selection contains all the common parts necessary to refurbish, or create a lamp with either a ceramic/glass or drilled wooden base.
BrandElekTek #ad
ManufacturerBuy It Better Limited #ad
Weight0.19

5. ElekTek

#ad

ElekTek ES E27 Lamp Bulb Holder Plain Skirt 10mm Entry Brilliant White Ideal for Vintage Filament Bulbs

#ad
ElekTek #ad - Ideal for vintage look lamps and bulbs. T2 temperature rating 220°C. This solid brass edison screw ES E27 lamp holder is intended primarily for attachment to a male 10mm threaded connector.

10mm entry plain skirt e27 earthed Lamp Holder. Locking body m10 10mm threaded entry edison Screw ES E27 cap brass earthed lamp holder, with internal locking screw and ceramic interior with brass plunger contacts. Has an internal safety locking screw in the base to prevent the loosening of the lamp holder after it has been installed. Solid brass, made in the uk. Before installing, switch off electricity at mains. This product is suitable for lighting circuits only.
BrandElekTek #ad
ManufacturerBuy It Better Ltd. #ad

6. Jubaopen

#ad

Jubaopen 20PCS E10 Lamp Base Lamp Holder Bulb Connector with Cable E10 Light Base Wire Connector Base Socket for Home Experiment Circuit Electrical Test Accessories

#ad
Jubaopen #ad - Easy to distinguish: each e10 led holder has two wires, red and green. Red represents the positive pole and green represents the negative pole. Very practical lamp holder, can be used for experimental circuit testing.

Different colors are easy to distinguish, and can be connected quickly. Multi-function lamp base: the lamp holder with wire socket can be applied to the home, electrical test, experimental circuit, physics teaching and old-fashioned torch accessory bracket. Practical bulb holder: the lamp base with cable is mainly used to connect most E10 led bulbs. Satisfactory packaging: you will get 20 e10 screw-mount lamp socket, the lamp holder size is 2.

4*1. 5cm, the wire length is 20cm. The interior is made of copper, with high hardness, has good compression and impact resistance, not easy to rust, wear resistance, and corrosion resistant. Sufficient quantity allows you to replace old or damaged bases. Durable material: the wire of the e10 lamp holder bulb connector is made of ABS, not easy to damage.
BrandJubaopen #ad
ManufacturerJubaopen #ad
Height0.59
Length7.87
Weight0.06 kg (0.12 Pounds)
Width0.95
Part NumberBH-20E10dizuo
ModelE10

7. ElekTek

#ad

ElekTek Unswitched Lamp Holder B22 BC Bayonet Cap & Shade Ring with Solid Brass CNC Back Plate Mount, Cover and Screws, Made in UK, Chrome

#ad
ElekTek #ad - Back-plate diameter 25mm, cover diameter 27mm. Internal locking screw mounted in a separate riveted & threaded base ensuring your lighting does not come apart with use beware of cheaper, pressed type bases that cannot carry a locking screw. Standard b22 22mm bayonet cap fitting, unswitched, with shade ring - suitable for bulbs up to 200W. Maximum assembled, fitted height 53mm. All metal light fittings must be earthed. Cover is secured when you screw down the lamp holder base.
BrandElekTek #ad
ManufacturerElekTek #ad
Part Number943879
Model943879

8. ElekTek

#ad

Made in UK, ElekTek Special Safety Switch Lamp Bulb Holder B22 BC Bayonet Cap with Shade Ring, Child Safe Switch Push Bar locks OFF to cut power supply when lamp bulb not inserted, Brass, 10mm/M10 x1 Threaded Bottom Entry

#ad
ElekTek #ad - Important: switch will only work when a bulb is fitted - Patented Safety Switch Push-Bar Design. Always remember: metal fittings must be earthed - when re-assembling after wiring, please ensure Earth Strap on the switch insert sits outside of the lamp holder body as originally supplied - do not squeeze inside the lamp holder body.

For all types of b22 22mm bayonet Cap Bulb: Incandescent, LED and Halogen. Dimensions: choice of 10mm or 1/2" threaded bottom entry - please check your thread size bEFORE ORDERING; Height 63mm, Diameter 32mm Max. Cable/Flex aperture approx. Suitable for lighting circuits only - T2 temperature rating 220°C. Made in uk: solid brass construction with solid brass shade ring. Fully approved to BS 7895:1997. 7mm.
BrandElekTek #ad
ManufacturerElekTek #ad
Part Number.
Model.

9. ElekTek

#ad

ElekTek Premium Lamp Kit Brass Safety Switch B22 Lamp Holder with Twisted Gold Flex and 3A UK Plug

#ad
ElekTek #ad - All electrical work should be undertaken by persons competent in the wiring and installation of these items. Perfect for creating a new lighting project or refurbishing an old table lamp. To ensure electrical regulations are met two types of strain relief are provided. If in any doubt, please consult a qualified electrician. Extra components are provided to ensure maximum compatibility with existing parts. The included comprehensive lamp kit Accessory Selection contains all the common parts necessary to refurbish, or create a lamp with either a ceramic/glass or drilled wooden base.
BrandElekTek #ad
ManufacturerBuy It Better Limited #ad
Weight0.19
Part Numbergrec-1103
Modelgrec-1103

10. ElekTek

#ad

Made in UK, NOT Suitable for B22 Lamp/Light Bulbs, ElekTek B15 SBC Brass 10mm Entry Miniature Lamp Bulb Holder Shade Ring

#ad
ElekTek #ad - This solid brass sbc small bayonet connector lampholder is intended primarily for attachment to a male 1/2 inch threaded connector.

Sbc15 bayonet cap brass earthed lampholder, with internal locking screw, shade ring and ceramic interior with brass plunger contacts. T2 temperature rating 220°C. M10 x 1mm threaded entry. Sbc b15 with shade ring, earthed, solid brass. Lampholder 10mm. Height 48mm. Before installing, switch off electricity at mains. Warning - electricity can kill - if in any doubt conSULT A QUALIFIED ELECTRICIAN. Maximum diameter 32mm. This product is suitable for lighting circuits only.
BrandElekTek #ad
ManufacturerBuy It Better Limited #ad